Personal protection
| Mod. SG | Mod. SGM | |
|
|
||
| Dielectric gloves | Insulating composite gloves | |
|
|
|
 |
| The insulating gloves for live working complies with the specifications of the European Standard EN 60903 and International Standard IEC 60903 specifications. Likewise, our production is subjected to a system for ensuring EC quality of production by means of monitoring to implement article 11b of the 89/686/EEC directive relating to Personal Protective Equipment which classifies insulating gloves for live working in category III (mortal risks). | Our new insulating composite gloves allow to work with total safety without leather over-gloves. According to EN 60903 and IEC 60903 Standards. The innovation of the selected raw materials confers the gloves a good suppleness despite of the thickness required to protect against the mechanical hazards. Furthermore, the chemical formula of the outer layer gives an exceptional grip, even in wet conditions. | |
| Mod. SG | Mod. SG-37 | |
|
|
||
| Leather overgloves | Fire-resistant gloves | |
|
|
|
 |
| Leather overgloves must be worn over dielectric gloves to protect against mechanical risks and, when necessary, against electric arc risks. These leather cowhide gloves with webbed thumbs have a 10 cm cuff in cow split with a tightening velcro strap on the back of the hand. The cowhide leather is treated with silicone to increase its waterproof characteristics. In accordance with EN 388 standard. | Gloves made of NOMEX fibre with fire-resistant properties. To be used under dielectric gloves with the aim of protecting against a possible electric arc. In accordance with EN 407 standard. | |
| Mod. SG38/39 | Mod. SH | |
|
|
||
| Mechanical protection gloves | Mechanical protection gloves | |
|
|
|
 |
| Working gloves to protect hands from mechanical risks. Suitable for any kind of job, where hands must be protected. Gloves made of grey or yellow skiver leather. According to EN 388-2122 and EN 420. | Gloves made of Nylon, cotton or kevlar, palm covered of blue,grey, green, nitrile . According to EN 388-3131 and EN 420. | |
| Mod. SG-36 | Mod. SG-35 | |
|
|
||
| Gloves bag | Metallic gloves case | |
|
|
|
 |
| Waterproof nylon bag to carry dielectric gloves. A fix strap on the back side makes easy to hold the bag on the belt. Outside size (cm): 42,5 x 22 | Metallic case with a methacrylate window. Ideal for carrying, storing and preserving dielectric gloves.It can be fixed on the wall thanks to a ring placed on the back side. Outside size (cm): 45,3 x 19,1 x 7,2 | |
| Mod. SGP | Mod. SG-117 | |
|
|
||
| Plastic gloves case | Pneumatic gauge | |
|
|
|
 |
| Plastic case to store and carry dielectric gloves. Outside size (cm): 47,5 x 17 x 5 | Pneumatic tester to check the absence of pores in dielectric gloves. They are checked by inflating them and immersing them in water. | |
| Mod. SO-06 | Mod. SO-46 | |
|
|
||
| Support belt with cord | Support belt with band | |
|
|
|
 |
| Support belt in accordance with EN 358 standard with padded support. It has one ring on each end to connect a fall-arrest system. It is supplied with an adjustable cord and one snap hook. | Support belt in accordance with EN 358 standard with padded support. It has one ring on each end to connect a fall-arrest system, as well as hooks that enable a tool-holder bag to be attached. It is supplied with an adjustable band and two fixed snap hooks. | |
| Mod. SO-50 | Mod. SO-71 | |
|
|
||
| Support belt with band | Safety harness with belt | |
|
|
|
 |
| Support belt in accordance with EN 358 standard with padded support which acts as a seat. It has one 45° flat ring on each end to connect a fall-arrest system. It is supplied with an adjustable band and two fixed snap hooks. | Fall prevention harness according to EN 361 standard. It has two link points: one on the back area and the other on the ascent and descent abdominal area. It has adjustable shoulder and leg straps, and a holding belt according to EN 358 standard with two side links on each end to connect a fall-arrest system. It is supplied with a 1m cord and two snap hooks on the back and an adjustable cord and two snap hooks on the belt. | |
| Mod. SO-07 | Mod. SO-41 | |
|
|
||
| Adjustable cord | Adjustable band | |
|
|
|
 |
| Fall-arrest element adjustable from 1,10 m to 1,80 m long in accordance with UNE-EN 354 standard. Made with polyamide cord with a diameter of 14 mm. It is supplied with two snap hooks. | Fall-arrest element adjustable from 1,20 m 1,80 m long in accordance with EN 358 standard. Made with 47 mm wide polyester band. It is supplied with two snap hooks. | |
| Mod. SO-44 | Mod. SO-45 | |
|
|
||
| Adjustable band | Anti-lumbago belt | |
|
|
|
 |
| Fall-arrest element adjustable from 1,20 m to 1,80 m long in accordance with EN 358 standard. Made with 47 mm wide polyester band. It is supplied with two snap hooks. | The anti-lumbago and anti-vibratory belts have been studied and designed to protect the back-lumbar area against all kind of efforts. It is made with red canvas support material and lined with 100% cotton. It is fastened with 100 cm long Velcro. | |
| Mod. SP-181-B | Mod. SPE | |
|
|
||
| Safety helmet | Safety helmet | |
|
|
|
 |
| Safety helmet with chin strap made of polyethylene in accordance with EN 397 standard and CE labelling. It is used to protect the head against mechanical risks. Harness adjustable to sizes 53 to 61 cm.It is supplied in white. Please, enquire for other colours. | Safety helmet with wheel for a quick ajustment sizing. Made of polyethylene in accordance with EN 397 standard and CE labelling. It is used to protect the head against mechanical and electrical risks. Harness adjustable to sizes from 53 to 61 cm. It is supplied in white. Please, enquire for other colours. | |
| Mod. SP-182 | Mod. SP-183 | |
|
|
||
| Face visor | Protective glasses | |
|
|
|
 |
| Face visor in accordance with EN 166 standard. It can be adjusted to all kind of safety helmets without needing to modify its characteristics. It is composed of a nylon adapter and a reclining visor. It repels molten metal, impacts at their highest level, liquid splashes and the risk of electric arc. It filters I.R. solar radiation. | Glasses in accordance with EN 166 and EN 169 standards. The front part is made of propionate and the arms are made of polycarbonate. Protection from the side and the top. Lenses made of IR/UV5 anti-abrasion green polycarbonate. | |
| Mod. SP-183F | Mod. SO-118 | |
|
|
||
| Glasses case | Watertight frontal torch | |
|
|
|
 |
| Torch that can be fixed to either the head or helmet. With adjustable light beam from a wide-to-narrow angle with great reach. | ||
| Mod. MP-4 | Mod. MP-1 | |
|
|
||
| Auditive protector | Self-filtering mask | |
|
|
|
 |
| Auditive protector in accordance with EN 352 standard. It isolates the worker of the external noises. | Self-filtering mask in accordance with EN 149 standard. With nose brace for better adaptation. | |
| Mod. BLVC-30E/40E/60E | Mod. GLV | |
|
|
||
| life line set | Life-line hook | |
|
|
|
 |
| Life line set composed of hook rope drive, 16 m rope with 14 mm2 section, snap hook, anti-fall dispositive and connectable pole of 2 parts and 3m total lenght. | Device composed of a snap hook to fix the rope which will be connected to the worker when climbs to the workplace. | |
| Mod. SO-28 | Mod. SO-75 | |
|
|
||
| Lifeline anti-fall device | Lifeline rope | |
|
|
|
 |
| This device is a mobile fall arrester on flexible anchorage line. A rapid downward movement causes it to lock on the rope. In accordance with EN 358 standard. | Rope roll of 16 meters and 14 mm diameter with thimbles at the ends. In accordance with EN 358 standard. | |
| Mod. SO-74 | Mod. SO-26 | |
|
|
||
| Self-blocking snap hook | Climbing irons | |
|
|
|
 |
| Snap hook to connect the rope to the lifeline hook. | Set of climbing irons used by operators to climb wooden posts. They are circular and have eight nails welded on, and a special curved shape to enable them to climb up and down. They are fixed on with 1,15 m straps made of 30 mm wide polyester and zinc steel buckles. | |
| Mod. SO-27 | Mod. SO-31 | |
|
|
||
| Small climbing devices | Flat tool-holder bag | |
|
|
|
 |
| With only one spike welded on. They are made of carbon steel curved platen. They have four 65 mm long support straps and padded leather pads. Polyester straps with metallic buckles and eyelets. | 260×290 mm flat tool-holder bag. Made of canvas with leather reinforcement on the bottom. It has leather straps with buckles to attach it to a belt. | |
| Mod. SO-32 | ||
|
|
||
| Circular tool-holder bag | ||
|
|
||
| 200×280 mm circular tool-holder bag. Made of canvas with leather reinforcement on the bottom. It has a handle for carrying and lifting. | ||
