30202 SGM

Composite insulating gloves provide electrical, mechanical, and arc-flash protection; therefore, it is not necessary to use them in combination with a separate mechanical protective over-glove.
The Composite glove range is made using a natural latex base coated with an outer layer of polychloroprene, combining mechanical resistance and comfort with a high level of electrical protection.
Arc-flash protection: the glove is manufactured from a material that provides a high level of protection against arc flash.

3 in 1
Protection: Electrical / Mechanical / Arc-flash 

MECHANICAL AND THERMAL REQUIREMENTS
Average tensile strength: ≥16 MPa
Average elongation at break: ≥600%
Tension set: ≤15%
Complementary test and performance levels to be achieved are as follows:

• Resistance to cutting: > 20 mm and 5N, according to ISO13997
• Resistance to abrasion: ≥0,05 mg/t
• Tearing resistance to: >25 N (equivalent to level 2 according to EN 388)
• Resistamce to penetration: >60 N (equivalent to level 2 according to EN 388)
• Resistance to very low temperatures: conditioning of the gloves for 24 hours at -40 ºC. ± 3ºC.
• Flame-retardant test: application of a flame for 10 seconds at a finger tip.