Mod. SGM

Insulated gloves

Composite insulated gloves provide electrical, mechanical and arc-flash protection, and as such do not need to be combined with any other kind of glove.

The Composite glove range is made using a natural latex base covered by an outer layer of polychloroprene, combining mechanical resistance and comfort with a high level of protection.

Arc flash protection: the glove material has excellent properties in the event of a short circuit in the electric arc.

 

MECHANICAL AND THERMAL REQUIREMENTS

Average tensile strength: ≥16 MPa
Average elongation at break: ≥600%
Tension set: ≤15%

Complementary test and performance levels to be achieved are as follows:
Resistance to cutting: > 2.5 (equivalent to level 2 according to EN 388)
Resistance to abrasion: ≥0,05 mg/t
Tearing resistance to: >25 N (equivalent to level 2 according to EN 388)
Resistamce to penetration: >60 N (equivalent to level 2 according to EN 388)
Resistance to low temperature: conditioning of gloves for 1 hour at -25 ±3°C.
Flame-retardant test: Application of a flame for 10 seconds at a finger tip.

Videos & Images