30906 PATC-PP15

Earthing and short-circuit equipment for substations.
The main aim for its installation is operator’s protection against an accidental commissioning or possible voltage return during repair operations.
The PP-15 clamp is suitable for installations with flat bars in horitzontal or vertical position.

According to IEC 61230 standard.

Composed of:

• 3 PP15 aluminium alloy clamps with bayonet fixing for cylindrical conductors with diameter between 6 and 15 mm and flat bars up to 15 x 55 mm.
• 3 copper cables with PVC insulation of 25/35/50 mm² section (depending on model) and 0.75 m long.
• 1 copper cable with PVC insulation of 25/35/50 mm² section (depending on model) and 2 m long.
• 1 insulated trifurcating connector.
• 1 TT-38A milling earthing lathe.
• 1 1.5 m telescopic pole with three sections.
• 1 plastic case to store and transport the equipment (Optional with wheels).